Engine Management Sensors
Showing 1–24 of 32 results
-
1/8 NPT IAT BUNG
$6.00 Add to cart -
1/8 NPT EGT BUNG
$6.00 Add to cart -
CONNECTOR AND TERMINALS FOR BOSCH 4.2 WIDEBAND OXYGEN SENSOR
$8.00 Add to cartCONNECTOR AND TERMINALS FOR BOSCH 4.2 WIDEBAND OXYGEN SENSOR
WHPWB423 is a connector, terminals, and wire seals for a Bosch 4.2 Wideband Oxygen Sensor.
$8.00 -
CONNECTOR AND TERMINALS FOR BOSCH 4.9 WIDEBAND OXYGEN SENSOR
$8.00 Add to cartCONNECTOR AND TERMINALS FOR BOSCH 4.9 WIDEBAND OXYGEN SENSOR
WHPWB493 is a connector, terminals, and wire seals for a Bosch 4.9 Wideband Oxygen Sensor.
$8.00 -
3/8 QUICK RELEASE TO -6 AN MALE ADAPTER
$9.00 Add to cart3/8 QUICK RELEASE TO -6 AN MALE ADAPTER
Adapter for quick release 3/8 fuel fittings to -6 AN male, Black.
$9.00 -
8 POSITION ROTARY SWITCH
$39.00 Add to cart8 POSITION ROTARY SWITCH
8 Position Rotary Switches can be used to control various ECU functions such as Traction Control and Boost Control settings.
$39.00 -
ECUMASTER FLUID TEMPERATURE SENSOR (OIL, WATER, ETC.), 1/8 NPT
$45.00 Add to cartECUMASTER FLUID TEMPERATURE SENSOR (OIL, WATER, ETC.), 1/8 NPT
ECUMaster Oil Temperature Sensor Kits are perfect for customers using the ECUMaster EMU standalone that would like to monitor oil temperature or fluid temperature. The ECUMaster Oil Temperature Sensor kit can also be used with the DET3.
$45.00 -
WHP AIR TEMPERATURE SENSOR KIT, 3/8 NPT
$49.00 Add to cartWHP AIR TEMPERATURE SENSOR KIT, 3/8 NPT
WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need an air temperature sensor to replace the one built into the MAF. The WHP Air Temperature Sensor Kit can also be used with the DET3 piggyback when it is used to eliminate the MAF and convert a vehicle to speed density.
$49.00 -
WHP EGT PROBE- TYPE K THERMOCOUPLE
$65.00 Add to cartWHP EGT PROBE- TYPE K THERMOCOUPLE
WHP EGT Sensors allow you to use the EGT inputs on the EMU and EMU Black to measure exhaust gas temperature. WHP Sensors are a stainless body Type K thermocouple and come with a male 1/8 NPT compression fitting and a female 1/8 NPT weld fitting. These sensors can be used with the EMU, EMU Black, or the ECUMaster 8 channel EGT module.
$65.00 -
WHP AIR TEMPERATURE SENSOR KIT, 1/8″ COMPACT
$65.00 Add to cartWHP AIR TEMPERATURE SENSOR KIT, 1/8″ COMPACT
This kit includes a 1/8″ compact Air Temp Sensor, aluminum weld bung, connector, terminals and seals.
$65.00 -
WHP IGN-1A IGNITION COIL
$75.00 Add to cartWHP IGN-1A IGNITION COIL
IGN-1A ignition coils are well known for their incredible spark energy and often cost less than other lesser commonly used ignition coils.
$75.00 -
WHP WIDEBAND KNOCK SENSOR KIT – M10
$85.00 Read moreWHP WIDEBAND KNOCK SENSOR KIT – M10
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU.
$85.00 -
WHP WIDEBAND KNOCK SENSOR KIT – M8
$85.00 Add to cartWHP WIDEBAND KNOCK SENSOR KIT – M8
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU.
$85.00 -
WHP WIDEBAND KNOCK SENSOR KIT – M12
$85.00 Add to cartWHP WIDEBAND KNOCK SENSOR KIT – M12
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU.
$85.00 -
WHP BOOST CONTROL SOLENOID KIT
$114.00 Add to cartWHP BOOST CONTROL SOLENOID KIT
WHP boost control solenoid kits can be used with either the EMU standalone engine control unit or the DET3 piggyback engine control unit.
$114.00 -
WHP 10 BAR PRESSURE SENSOR, 1/8 NPT
$114.00 Add to cartWHP 10 BAR PRESSURE SENSOR, 1/8 NPT
WHP 10 BAR PRESSURE SENSORS are ideally suited for automotive applications such as oil and fuel pressure. 7 bar sensors are generally used for fuel pressure, and 10 bar sensors are recommended for oil pressure as cold oil pressure can easily exceed 7 bar. It is advisable to purchase a sensor with some excess range above your normal operating range.
$114.00 -
WHP BOOST CONTROL SOLENOID KIT (BLUE)
$114.00 Add to cartWHP BOOST CONTROL SOLENOID KIT (BLUE)
WHP boost control solenoid kits can be used with either the EMU standalone engine control unit or the DET3 piggyback engine control unit.
$114.00 -
WHP WIDEBAND OXYGEN SENSOR KIT- BOSCH 4.9 WITH CONNECTOR AND TERMINALS
$119.00 Add to cartWHP WIDEBAND OXYGEN SENSOR KIT- BOSCH 4.9 WITH CONNECTOR AND TERMINALS
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black.
$119.00 -
WHP WIDEBAND OXYGEN SENSOR KIT- BOSCH 4.2 WITH CONNECTOR AND TERMINALS
$119.00 Add to cartWHP WIDEBAND OXYGEN SENSOR KIT- BOSCH 4.2 WITH CONNECTOR AND TERMINALS
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU.
$119.00 -
WHP BOOST CONTROL SOLENOID KIT- BLACK FITTINGS AND BRACKET
$126.00 Add to cartWHP BOOST CONTROL SOLENOID KIT- BLACK FITTINGS AND BRACKET
WHP boost control solenoid kits can be used with either the EMU, EMU Classic, or EMU Black standalone engine control unit or the DET3 piggyback engine control unit.
$126.00