Outputs & Ignition Coils & Kits
Showing 1–24 of 47 results
-
Thermal Paste – Suits all OEM ignition Igniters
$10.00-
Add to cart
-
Plugs and Pins Only – Suit Idle Air Control Motor Screw-in Style
$15.00-
Read more
Plugs and Pins Only – Suit Idle Air Control Motor Screw-in Style
Suit: Idle Air Control Motor – Screw-in
$15.00 -
Plug and Pins Only – Delphi 3 Pin Single Row Flat Coil Connector
$16.00-
Add to cart
Plug and Pins Only – Delphi 3 Pin Single Row Flat Coil Connector
Suits: HT-020112 – High Output Inductive Coil suit HPI modules HT-020132 – High Output CDI Coil
Includes: Pack of 3 Pins.
$16.00 -
Plugs and Pins Only – Suit High Output IGN-1A Inductive Coil with built-in Ignitor
$16.00-
Add to cart
Plugs and Pins Only – Suit High Output IGN-1A Inductive Coil with built-in Ignitor
Suit: IGN-1A IGBT Coil with Ignitor
$16.00 -
Plugs and Pins Only – Suit Idle Air Control Motor 2 Screw Style
$16.00-
Add to cart
Plugs and Pins Only – Suit Idle Air Control Motor 2 Screw Style
Suit: Idle Air Motor 2 Screw Style
$16.00 -
Plug and Pins Only – Bosch 5 Pin Junior Timer Female Connector
$21.00-
Add to cart
Plug and Pins Only – Bosch 5 Pin Junior Timer Female Connector
Suits: HT-020006 – Quad Channel OEM Igniter (ECU control/Switch side only)
Includes: Pack of 5 Pins.
$21.00 -
Plug and Pins Only – Bosch 7 Pin Junior Timer Female Connector
$26.00-
Add to cart
Plug and Pins Only – Bosch 7 Pin Junior Timer Female Connector
Suits: HT-020002 – Dual Channel OEM Igniter HT-020004 – Triple Channel OEM Igniter
Includes: Pack of 7 Pins.
$26.00 -
6 Channel Ignition Extension Harness – 1200mm / 47.2″ Length: 1200mm / 47.2″
$42.00-
Add to cart
6 Channel Ignition Extension Harness – 1200mm / 47.2″ Length: 1200mm / 47.2″
Suits: Selected Haltech Terminated Engine Harnesses
Includes: 1 x HT-130348 – 6 Channel Ignition Extension Harness
Notes: Please ensure you check pinout compatibility if using to adapt to harnesses from other manufacturers
$42.00 -
Plug and Pins Only – AMP 26 Pin 2 Row Superseal Connector
$47.00-
Add to cart
Plug and Pins Only – AMP 26 Pin 2 Row Superseal Connector
Suits: HT-020032 – HPI4 – High Power Igniter HT-020036 – HPI6 – High Power Igniter HT-020040 – HPI8 – High Power Igniter
$47.00 -
High Output Inductive Coil
$72.00-
Add to cart
High Output Inductive Coil
Suits: Haltech range of HPI High Power Igniters.
Includes: Matching Delphi plug and pins.
Notes: Must be used with an ignitor ignitor/module.
$72.00 -
High Output IGN-1A Inductive Coil with built-in Ignitor (Smart Coil)
$88.00-
Add to cart
High Output IGN-1A Inductive Coil with built-in Ignitor (Smart Coil)
Includes: Matching plug and pins.
$88.00 -
High Output CDI Coil
$88.00-
Add to cart
-
LS1 Coil with built-in Ignitor
$88.00-
Add to cart
-
HPI4 – High Power Igniter – 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78″)
$125.00-
Read more
HPI4 – High Power Igniter – 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$125.00 -
HPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78″)
$125.00-
Read more
HPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$125.00 -
Boost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
$130.00-
Add to cart
Boost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)$130.00 -
HPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78″)
$130.00-
Add to cart
HPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$130.00 -
Elite 1000/1500 Terminated Ignition Harness for Mazda 13B (IGN-1A)
$130.00-
Add to cart
Elite 1000/1500 Terminated Ignition Harness for Mazda 13B (IGN-1A)
Suits: Elite 1000/1500 Mazda 13B Terminated Engine Harness
Notes: This Ignition Harness connects to the Haltech IGN-1A ignition coils (HT-020114). Recommended as an add-on to the Elite 1000/1500 Terminated Engine Harness for Mazda 13B.
$130.00 -
Boost Control Solenoid 4 Port Thread: 1/8 NPT
$145.00-
Add to cart
Boost Control Solenoid 4 Port Thread: 1/8 NPT
Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Isolated Mount 1 x Mounting Bracket with fitting hardware
$145.00 -
Dual Channel OEM Igniter (DUMB)
$160.00-
Add to cart
Dual Channel OEM Igniter (DUMB)
Includes: Mounting bracket, thermal paste and matching plug and pins.
$160.00 -
DC Motor Driver – DCMD Size: 86mm x 55.5mm
$165.00-
Add to cart
DC Motor Driver – DCMD Size: 86mm x 55.5mm
Outputs: 2
Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors
Includes: 1 x DC Motor Driver – DCMD 1 x DT02-2S with Pins and Wedge 1 x DT06-4S with Pins and Wedge 1 x DTM06-4S – with Pins and Wedge 1 x DTM04-4P- with Pins and Wedge 1 x Quick Start Guide
Notes: Works with Nexus Series, Elite Series and Platinum Series ECU’s Requires 2 x DPO outputs from ECU to control ( Active State = Low)
$165.00 -
Sale!
OHM Custom IGN-1A Smart Coil Ignition Wires (EVO 4-9)
$174.99 – $189.99-
Select options This product has multiple variants. The options may be chosen on the product page
OHM Custom IGN-1A Smart Coil Ignition Wires (EVO 4-9)
Custom Ignition wires for your IGN-1a ignition system with your choice of 8.5 or 10mm.
$174.99 – $189.99Select options This product has multiple variants. The options may be chosen on the product page -
Idle Air Control Kit – Billet 2 Port Housing With 2 Screw Style Motor Diameter: 10mm (3/8″)
$185.00-
Add to cart
Idle Air Control Kit – Billet 2 Port Housing With 2 Screw Style Motor Diameter: 10mm (3/8″)
Includes: Matching plugs and pins.
$185.00 -
Triple Channel OEM Igniter (DUMB)
$199.00-
Add to cart
Triple Channel OEM Igniter (DUMB)
Includes: Mounting bracket, thermal paste and matching plug and pins.
$199.00
