Pickups/Triggers
Showing all 11 results
-
Plug and Pins Only – Bosch 4 Pin Junior Timer Female Connector
$21.00-
Add to cart
Plug and Pins Only – Bosch 4 Pin Junior Timer Female Connector
Suits: HT-020006 – Quad Channel OEM Igniter (Coil output/Drive side only) HT-010604 – S3 – Black Dual Channel Hall Effect Sensor HT-010606 – S4 – Grey Dual Channel Hall Effect Sensor
Includes: Pack of 4 Pins.
$21.00 -
Plug and Pins Only – 12 Pin Tyco
$26.00-
Add to cart
Plug and Pins Only – 12 Pin Tyco
Suits: DRA Digital Reluctor Adaptor.
Includes: Pack of 12 Pins.
$26.00 -
Rare Earth Magnets Size: 5mm Diameter x 2mm Height
$26.00-
Add to cart
-
“Red” Single Channel Hall Effect Sensor Thread: M12x1.0
$88.00-
Add to cart
“Red” Single Channel Hall Effect Sensor Thread: M12x1.0
Suits: Wheel Speed, Crank/Cam etc.
Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
$88.00 -
GT101 Style High Frequency Hall Effect Sensor Size: 18mm Diameter
$88.00-
Add to cart
GT101 Style High Frequency Hall Effect Sensor Size: 18mm Diameter
Suits: Wheel Speed, Crank/Cam etc.
Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
$88.00 -
Haltech Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet Size: ID : 2.187″ \ 55.55mm
$115.00-
Add to cart
Haltech Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet Size: ID : 2.187″ \ 55.55mm
Includes: 1 x Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet
Notes: 8 magnet pickup split collar – suits 2.187″ Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 2.125″ / 53.98mm I.D. 8 Magnet Size: ID 2.125″ / 53.98mm
$115.00-
Add to cart
Haltech Driveshaft Split Collar 2.125″ / 53.98mm I.D. 8 Magnet Size: ID 2.125″ / 53.98mm
Includes: 1 x Driveshaft Split Collar 2.125″/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup split collar – suits 2.125″ / 53.98mm Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet Size: ID : 1.875″ / 47.63mm
$115.00-
Add to cart
Haltech Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet Size: ID : 1.875″ / 47.63mm
Includes: 1 x Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup collar – suits 1.875″/ 47.63mm Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 1.812″ / 46mm I.D. 8 Magnet Size: ID: 1.812″ / 46mm
$115.00-
Add to cart
Haltech Driveshaft Split Collar 1.812″ / 46mm I.D. 8 Magnet Size: ID: 1.812″ / 46mm
Includes: 1 x Driveshaft Split Collar 1.812″ I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup split collar – suits 1.812″ / 46mm Driveshaft
$115.00 -
Stainless Steel Single Channel Hall Effect Sensor Thread: 3/8 24 TPI
$205.00-
Add to cart
Stainless Steel Single Channel Hall Effect Sensor Thread: 3/8 24 TPI
Suits: Wheel Speed, Crank/Cam etc.
Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
$205.00 -
Laser Ride Height Sensor Length: 25mm (1″) to 500mm (19.5″) Range
$895.00-
Add to cart
Laser Ride Height Sensor Length: 25mm (1″) to 500mm (19.5″) Range
Outputs: 0-5v Analogue Output.
Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective glass lens and setup guide.
$895.00
