O2 Wideband Controllers & Accessories
Showing all 21 resultsSorted by price: low to high
-
O2 Sensor weld-on bung – 303 Stainless Steel Thread: M18 x1.5
$16.00-
Add to cart
O2 Sensor weld-on bung – 303 Stainless Steel Thread: M18 x1.5
Includes: 1 x Weld on Bung – 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug.$16.00 -
O2 Sensor weld-on bung – 6061 Aluminium Thread: M18 x1.5
$16.00-
Add to cart
O2 Sensor weld-on bung – 6061 Aluminium Thread: M18 x1.5
Suits: M18 Thread Oxygen Sensors
Includes: 1 x 6061 Aluminium Weld On Bung
$16.00 -
CAN Adaptor Loom DTM-4 to Flying Leads
$26.00-
Add to cart
CAN Adaptor Loom DTM-4 to Flying Leads
Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector
Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads)
Notes: Suits aftermarket ECUs using the AMP Superseal 1.0 Series Connector Terminated with 2 x Pins to suit connector.
$26.00 -
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6
$31.00-
Add to cart
LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6
Suits: NEXUS Series devices
Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness
Notes: Plug’n’Play with NEXUS series harnesses
$31.00 -
NTK Wideband Adaptor Harness For NEXUS Series Devices Length: 1.2M (4ft)
$31.00-
Add to cart
NTK Wideband Adaptor Harness For NEXUS Series Devices Length: 1.2M (4ft)
Suits: NEXUS Series Devices
Includes: 1 x HT-010727 NTK to DTM-6 Harness
$31.00 -
Wideband Adaptor Harness – 400mm Length: 400mm
$31.00-
Add to cart
Wideband Adaptor Harness – 400mm Length: 400mm
Suits: NEXUS Series devices
Includes: 1 x DTM-6 to Superseal Pins Harness
Notes: Pre terminated with AMP superseal pins for easy installation into your ECU
$31.00 -
CAN Adaptor Loom DTM-4 to JST 5-pin
$36.00-
Add to cart
CAN Adaptor Loom DTM-4 to JST 5-pin
Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs
Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) – Suits Link PlugIn ECUs
Notes: Use with Link Plug-in range of ECUs
$36.00 -
CAN Adaptor Loom DTM-4 to Minifit Jr
$36.00-
Add to cart
CAN Adaptor Loom DTM-4 to Minifit Jr
Suits: Haltech iC-7 and Microtech ECUs
Includes: 1 x HT-130049 Can Adaptor Loom
Notes: Use with Microtech CAN Hub for direct plug and play
$36.00 -
Wideband Harness for Elite PRO Plug-in ECUs Length: 1.2m
$47.00-
Add to cart
Wideband Harness for Elite PRO Plug-in ECUs Length: 1.2m
Suits: Elite PRO Plug-in ECUs for Australian-made Ford “Barra” Falcons only.
Includes: 1.2m wideband harness, Bosch LSU 4.9 connector, ECU pins.
$47.00 -
Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)
$52.00-
Add to cart
Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)
Wideband Extension Harness To suit LSU4.9
Length: 1.2M (4ft)$52.00 -
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
$52.00-
Add to cart
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)
Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector)
Notes: Suits Dual-Connector Link ECUs Wiring of input power required
$52.00 -
Wideband Sensor – Bosch LSU 4.9
$130.00-
Add to cart
Wideband Sensor – Bosch LSU 4.9
Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2
Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
$130.00 -
Wideband O2 Sensor only – Bosch LSU 4.2
$150.00-
Add to cart
Wideband O2 Sensor only – Bosch LSU 4.2
Includes: Pre-terminated with female Deutsch DT-6 connector.
$150.00 -
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs
$180.00-
Add to cart
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs
Suits: Elite PRO Plug-in ECUs for Australian-made Ford “Barra” Falcons only.
Includes: O2 Sensor, 1.2m extension cable and weld-on bung.
$180.00 -
LSU4.9 Wideband Hardware Pack
$180.00-
Add to cart
LSU4.9 Wideband Hardware Pack
Suits: NEXUS Series
Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 – Adaptor Harness, 1 x Weldable Bung
Notes: Plug and Play with NEXUS Series Harnesses
$180.00 -
Wideband O2 Sensor NTK LZA08-H5
$180.00-
Add to cart
Wideband O2 Sensor NTK LZA08-H5
Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units.
Includes: 1 x NTK LZA08-H5 Wideband Sensor – modified
Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip.
$180.00 -
NTK Wideband Hardware Pack
$215.00-
Add to cart
NTK Wideband Hardware Pack
Suits: NEXUS Series devices
Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 – NTK to DTM-6 Harness, 1 x Weldable Bung
Notes: Plug’n’Play with NEXUS Series Harnesses
$215.00 -
WB1 Bosch – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$375.00-
Add to cart
WB1 Bosch – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: Bosch LSU 4.9 Sensor
Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4’/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide.
Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
$375.00 -
WB2 Bosch – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$550.00-
Add to cart
WB2 Bosch – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: Bosch LSU 4.9 Sensor
Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4’/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide.
Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
$550.00 -
WB1 NTK – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$550.00-
Add to cart
WB1 NTK – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: NTK Sensor
Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4’/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide.
Notes: Best product for methanol powered vehicles
$550.00 -
WB2 NTK – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$750.00-
Add to cart
WB2 NTK – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: NTK Sensor
Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4’/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide.
Notes: Best product for methanol powered vehicles
$750.00
