Haltech rate
-
1/4″ Open Tip Thermocouple Length: 2.21m (87″)
$98.00-
Add to cart1/4″ Open Tip Thermocouple Length: 2.21m (87″)
Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.
Includes: Mini K Type connector.
Notes: Does not include any fitting hardware. Please order seperately if required.
$98.00 -
1/4″ Open Tip Thermocouple Length: 2.32m (91.5″)
$98.00-
Add to cart1/4″ Open Tip Thermocouple Length: 2.32m (91.5″)
Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.
Includes: Mini K Type connector.
Notes: Does not include any fitting hardware. Please order seperately if required.
$98.00 -
1/4″ Open Tip Thermocouple Length: 2.44m (96″)
$98.00-
Add to cart1/4″ Open Tip Thermocouple Length: 2.44m (96″)
Suits: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier.
Includes: Mini K Type connector.
Notes: Does not include any fitting hardware. Please order seperately if required.
$98.00 -
Analogue Output Adaptor
$110.00-
Add to cartAnalogue Output Adaptor
Outputs: Converts a PWM Output to 0-5v Analogue Signal.
Suits: e.g for use with Evo 10 AWD controller.
Includes: HT-031016 – Matching Set of Deutsch DTM 4 Connectors.
$110.00 -
Nissan Attesa 4WD TPS Adaptor
$110.00-
Add to cartNissan Attesa 4WD TPS Adaptor
Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a standalone ECU.
Includes: HT-031016 – Matching Set of Deutsch DTM 4 Connectors.
Notes: Not required for use with the Haltech Plug ‘n’ Play Adaptor Harness or Platinum PRO Direct Plug-in range.
$110.00 -
1 Bar GM MAP Sensor
$110.00-
Add to cart -
Knock Sensor – Genuine Bosch
$110.00-
Add to cartKnock Sensor – Genuine Bosch
Suits: 8mm (5/16″) mounting bolt.
Includes: Matching plug and 2 pins.
$110.00 -
Nexus PD16 Tube Mount Kit 1.625″ Diameter: 1.625″ / 41.275mm
$115.00-
Add to cartNexus PD16 Tube Mount Kit 1.625″ Diameter: 1.625″ / 41.275mm
Suits: Nexus PD16
Includes: 1 x Mounting Plate and hardware 2 x 1.625″ / 41.275mm Tube Clamps 4 x M6 Anti Vibration Mounts
$115.00 -
Nexus PD16 Tube Mount Kit 1.25″ Diameter: 1.25″ / 31.75mm
$115.00-
Add to cartNexus PD16 Tube Mount Kit 1.25″ Diameter: 1.25″ / 31.75mm
Includes: 1 x Mounting Plate and hardware 2 x 1.25″ / 31.75mm Tube Clamps 4 x M6 Anti Vibration Mounts
$115.00 -
Haltech Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet Size: ID : 2.187″ \ 55.55mm
$115.00-
Add to cartHaltech Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet Size: ID : 2.187″ \ 55.55mm
Includes: 1 x Driveshaft Split Collar 2.187″\ 55.55mm I.D. 8 Magnet
Notes: 8 magnet pickup split collar – suits 2.187″ Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 2.125″ / 53.98mm I.D. 8 Magnet Size: ID 2.125″ / 53.98mm
$115.00-
Add to cartHaltech Driveshaft Split Collar 2.125″ / 53.98mm I.D. 8 Magnet Size: ID 2.125″ / 53.98mm
Includes: 1 x Driveshaft Split Collar 2.125″/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup split collar – suits 2.125″ / 53.98mm Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet Size: ID : 1.875″ / 47.63mm
$115.00-
Add to cartHaltech Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet Size: ID : 1.875″ / 47.63mm
Includes: 1 x Driveshaft Split Collar 1.875″/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup collar – suits 1.875″/ 47.63mm Driveshaft
$115.00 -
Haltech Driveshaft Split Collar 1.812″ / 46mm I.D. 8 Magnet Size: ID: 1.812″ / 46mm
$115.00-
Add to cartHaltech Driveshaft Split Collar 1.812″ / 46mm I.D. 8 Magnet Size: ID: 1.812″ / 46mm
Includes: 1 x Driveshaft Split Collar 1.812″ I.D. 8 Magnet 1 x 5/32 Allen Key
Notes: 8 magnet pickup split collar – suits 1.812″ / 46mm Driveshaft
$115.00 -
Linear Position Sensor – 1/2″ – 50mm Travel Length: Between Mounting Holes (Closed) 167mm
$115.00-
Add to cartLinear Position Sensor – 1/2″ – 50mm Travel Length: Between Mounting Holes (Closed) 167mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$115.00 -
Linear Position Sensor – 1/2″ – 100mm Travel Length: Between Mounting Holes (Closed) 217mm
$115.00-
Add to cartLinear Position Sensor – 1/2″ – 100mm Travel Length: Between Mounting Holes (Closed) 217mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$115.00 -
Elite CAN HUB 4 Port DTM-4
$125.00-
Add to cartElite CAN HUB 4 Port DTM-4
SUITS: For use with up to three CAN devices.INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 – 300mm (12″)NOTES: Direct Plug ‘n’ Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to connect mutiple CAN devices to your ECU.$125.00 -
HPI4 – High Power Igniter – 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78″)
$125.00-
Read moreHPI4 – High Power Igniter – 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$125.00 -
HPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78″)
$125.00-
Read moreHPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$125.00 -
Wideband Sensor – Bosch LSU 4.9
$130.00-
Add to cartWideband Sensor – Bosch LSU 4.9
Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2
Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
$130.00 -
Boost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
$130.00-
Add to cartBoost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)$130.00 -
iC-7 Moulded Panel Mount Size: 250mm x 500mm (10″ x 20″)
$130.00-
Add to cartiC-7 Moulded Panel Mount Size: 250mm x 500mm (10″ x 20″)
Suits: Haltech iC-7 Display Dash
Includes: 1 x iC-7 Moulded Panel Mount- Black
Notes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic
$130.00 -
Haltech HC5 – Hydraulic Crimper
$130.00-
Add to cartHaltech HC5 – Hydraulic Crimper
Suits: 00 AWG to 12AWG cable.
Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets – (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide
$130.00 -
HPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78″)
$130.00-
Add to cartHPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78″)
HPI8 – High Power Igniter
$130.00