Haltech rate
-
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs
$180.00-
Add to cart
Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs
Suits: Elite PRO Plug-in ECUs for Australian-made Ford “Barra” Falcons only.
Includes: O2 Sensor, 1.2m extension cable and weld-on bung.
$180.00 -
Linear Position Sensor – 1″ – 200mm Travel Length: Between Mounting Holes (Closed) 327mm
$180.00-
Add to cart
Linear Position Sensor – 1″ – 200mm Travel Length: Between Mounting Holes (Closed) 327mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$180.00 -
LSU4.9 Wideband Hardware Pack
$180.00-
Add to cart
LSU4.9 Wideband Hardware Pack
Suits: NEXUS Series
Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 – Adaptor Harness, 1 x Weldable Bung
Notes: Plug and Play with NEXUS Series Harnesses
$180.00 -
Wideband O2 Sensor NTK LZA08-H5
$180.00-
Add to cart
Wideband O2 Sensor NTK LZA08-H5
Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units.
Includes: 1 x NTK LZA08-H5 Wideband Sensor – modified
Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip.
$180.00 -
Idle Air Control Kit – Billet 2 Port Housing With 2 Screw Style Motor Diameter: 10mm (3/8″)
$185.00-
Add to cart
Idle Air Control Kit – Billet 2 Port Housing With 2 Screw Style Motor Diameter: 10mm (3/8″)
Includes: Matching plugs and pins.
$185.00 -
Plug and Pin Set for NEXUS R5
$199.00-
Add to cart
Plug and Pin Set for NEXUS R5
Suits: NEXUS R5
Includes: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position Connector Key2 1 x AMP 26 Position Connector Key3 1 x DTP 4 Position Deutsch Connector and Wedge 125 x Pins suit AMP Superseal Connectors 4 x DTP Female Pins
Notes: Used to construct harness for NEXUS R5 VCUs.
$199.00 -
Triple Channel OEM Igniter (DUMB)
$199.00-
Add to cart
Triple Channel OEM Igniter (DUMB)
Includes: Mounting bracket, thermal paste and matching plug and pins.
$199.00 -
Linear Position Sensor – 1″ – 250mm Travel Length: Between Mounting Holes (Closed) 377mm
$199.00-
Add to cart
Linear Position Sensor – 1″ – 250mm Travel Length: Between Mounting Holes (Closed) 377mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$199.00 -
150 PSI “TI” Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
$205.00-
Add to cart
150 PSI “TI” Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
Includes: Matching Delphi plug and 3 pins, -4 AN adaptor.
Notes: “TI” Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$205.00 -
250 PSI “TI” Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
$205.00-
Add to cart
250 PSI “TI” Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
Includes: Matching plug and pins, -4 AN adaptor.
Notes: “TI” Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$205.00 -
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
$205.00-
Add to cart
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Includes: Matching Delphi plug and 3 pins.
Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$205.00 -
250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
$205.00-
Add to cart
250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Includes: Matching Delphi plug and 3 pins.
Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$205.00 -
Flex Fuel Composition Sensor
$205.00-
Add to cart
Flex Fuel Composition Sensor
Suits: 3/8 “GM Spring Lock” fittings.Includes: Matching plug and 3 pins.
$205.00 -
Dual Crimper Set Inc 3 pin removal tools
$205.00-
Add to cart
-
500 PSI “TI” Pressure Sensor Thread: 1/8 NPT
$205.00-
Add to cart
500 PSI “TI” Pressure Sensor Thread: 1/8 NPT
Includes: Matching plug and pins, -4 AN adaptor.
Notes: “TI” Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$205.00 -
TMS-4 Tyre Monitoring System External Sensors
$205.00-
Add to cart
TMS-4 Tyre Monitoring System External Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide
Notes: Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years
$205.00 -
TMS-4 Tyre Monitoring System Internal Sensors
$205.00-
Add to cart
TMS-4 Tyre Monitoring System Internal Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide
Notes: Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years
$205.00 -
Stainless Steel Single Channel Hall Effect Sensor Thread: 3/8 24 TPI
$205.00-
Add to cart
Stainless Steel Single Channel Hall Effect Sensor Thread: 3/8 24 TPI
Suits: Wheel Speed, Crank/Cam etc.
Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
$205.00 -
Throttle Position Sensor – Motorsport Contactless Size: 8mm D-Shaft
$205.00-
Add to cart
Throttle Position Sensor – Motorsport Contactless Size: 8mm D-Shaft
Suits: CW & CCW Rotation
Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014)
$205.00 -
Dual Switch Panel Kit
$211.00-
Add to cart
Dual Switch Panel Kit
Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.
$211.00 -
NTK Wideband Hardware Pack
$215.00-
Add to cart
NTK Wideband Hardware Pack
Suits: NEXUS Series devices
Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 – NTK to DTM-6 Harness, 1 x Weldable Bung
Notes: Plug’n’Play with NEXUS Series Harnesses
$215.00 -
Semi Terminated Stand-Alone Harness For iC-7 Display Dash
$218.00-
Add to cart
Semi Terminated Stand-Alone Harness For iC-7 Display Dash
Suits: Haltech iC-7 Display Dash HT-010001 – iC-7Sensor Pack
Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable Ties
Notes: Use with HT-010001 – iC-7 Sensor Pack
$218.00 -
1AWG Terminated Cable Pair (4m) Length: 4m
$239.00-
Read more
1AWG Terminated Cable Pair (4m) Length: 4m
Suits: NEXUS R5
Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG battery cable (Black) pre-terminated with SurLok connector. 4m.
$239.00 -
Idle Air Control Valve – Bosch BAC/PWM 2 port
$241.00-
Read more
Idle Air Control Valve – Bosch BAC/PWM 2 port
Suits: 19mm 3/4″) ID hose.
Includes: Matching plugs and pins.
Notes: 2 Pin connection. Can be used when 4 wire stepper motor idle control output is not available on your model ECU.
$241.00
