Haltech rate
-
Nexus R3 Universal Wire-in Harness – 2.5m (8′) Length: 2.5M
$400.00-
Add to cartNexus R3 Universal Wire-in Harness – 2.5m (8′) Length: 2.5M
Suits: Nexus R3
Includes: 3 x Main ECU connectors 3 x CAN Connectors 1 x Wideband Connector 1 x Firewall Grommet Fully populated with TXL wire
$400.00 -
V8 Ford Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness
$419.00-
Read moreV8 Ford Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness
Suits: A direct Plug ‘n’ Play solution to add 8 individual high output IGN-1A inductive coils with Ford Small/Big Blockfiring order to an E2000/2500 Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness or Elite + REM Fully Integrated Flying Lead Harness
Includes: Terminated “Tefzel” Milspec coil harness with high current 75A TE power relay.
Notes: Ignition coils are NOT included. Please order 8 x HT-020114 if required.
$419.00 -
HPI8 – High Power Igniter – 15 Amp Eight Channel Module Only
$425.00-
Add to cart -
Multi-Function CAN Gauge
$430.00-
Add to cartMulti-Function CAN Gauge
SIZE: 52mm (2″)SUITS: Haltech Version 2 CAN bus protocol.INCLUDES: 52mm (2″) CAN Gauge, gaugeART CAN Cable to 8 pin Black Tyco – 1.5m (5ft), mounting bracket.NOTES: This product is direct Plug’n’Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device installation using an Elite 4 Port CAN HUB. If you are connecting this product with a Platinum Series ECU you will need a DTM4 to Tyco adaptor cable Part No. HT-130040.$430.00 -
V8 GM/Chrysler Hemi Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness
$435.00-
Add to cartV8 GM/Chrysler Hemi Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness
Suits: A direct Plug ‘n’ Play solution to add 8 individual high output IGN-1A inductive coils with GM/Chrysler Hemi Small/Big Block firing order to an E2000/2500 Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness or Elite + REM Fully Integrated Flying Lead Harness
Includes: Terminated “Tefzel” Milspec coil harness with high current 75A TE power relay.
Notes: Ignition coils are NOT included. Please order 8 x HT-020114 if required.
$435.00 -
Haltech CAN Keypad 15 button (3×5) Thread: M6
$435.00-
Add to cartHaltech CAN Keypad 15 button (3×5) Thread: M6
Suits: NEXUS and Elite devices only
Includes: 1 x 15 Button Keypad (3×5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit
Notes: Not compatible with Platinum or earlier ECUs
$435.00 -
TCA4 – Quad Channel Thermocouple Amplifier (CAN ID – Box A)
$435.00-
Add to cartTCA4 – Quad Channel Thermocouple Amplifier (CAN ID – Box A)
Outputs: CAN and 0-5 V analogue outputs.
Includes: Quad Channel Thermocouple Amplifier, Elite CAN cable DTM-4 to 8 pin Black Tyco – 300mm (12″)
Notes: Combine two Dual and/or Quad Channel Thermocouple Amplifiers with different CAN ID’s (Box A or B) for up to 12 channels (subject to ECU compatibility)
$435.00 -
TCA4 – Quad Channel Thermocouple Amplifier (CAN ID – Box B)
$435.00-
Add to cartTCA4 – Quad Channel Thermocouple Amplifier (CAN ID – Box B)
Outputs: CAN and 0-5 V analogue outputs.
Includes: Quad Channel Thermocouple Amplifier, Elite CAN cable DTM-4 to 8 pin Black Tyco – 300mm (12″)
Notes: Combine two Dual and/or Quad Channel Thermocouple Amplifiers with different CAN ID’s (Box A or B) for up to 12 channels (subject to ECU compatibility)
$435.00 -
Elite 1500 VW/Audi 1.8T AWP ONLY (2001-2006) Plug ‘n’ Play Adaptor Harness
$440.00-
Read moreElite 1500 VW/Audi 1.8T AWP ONLY (2001-2006) Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006) Volkswagen Golf Mk4 GTI, Bora/Jetta, Beetle, Polo GTI, Audi A3, A4 Quattro Sport, TT Mk1 (8N), Skoda Octavia vRS & SEAT Leon, Toledo. Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
Notes: The CAN dash support was developed on a 2003 VW Beetle – other models may not be supported or have reduced dash functionality.
$440.00 -
Elite 2000/2500 Plug ‘n’ Play Adaptor Harness Kit to suit Toyota Supra JZA80 2JZ (non VVTi)
$440.00-
Read moreElite 2000/2500 Plug ‘n’ Play Adaptor Harness Kit to suit Toyota Supra JZA80 2JZ (non VVTi)
Suits: Plug ‘n’ Play replacement of the factory ECU for Toyota Supra JZA80 2JZ non VVTi with manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins, USB programming cable and software CD.
$440.00 -
Elite 2500 & 2500 T Premium Universal Wire-in Harness Length: 2.5m (8′)
$450.00-
Add to cartElite 2500 & 2500 T Premium Universal Wire-in Harness Length: 2.5m (8′)
Elite 2500 & 2500 T Premium Universal Wire-in Harness
Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits.
$450.00 -
CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Thread: 1/8 NPT
$455.00-
Add to cartCO2 Boost Control Dual Solenoid & Pressure Sensor Kit Thread: 1/8 NPT
Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI “TI” wastegate pressure sensor with -4 AN adaptor and “T” fitting.$455.00 -
Elite 1000/1500 Honda OBD-I B-Series Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Honda OBD-I B-Series Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Honda OBD-I B-Series 92-95 Civic, Integra and Prelude. 90-95 Accord. Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000-2500 Mazda RX7 FD3S-S7&8 Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000-2500 Mazda RX7 FD3S-S7&8 Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Mazda RX7 FD3S-S7&8 (96-02) 4 row ECU plug. Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000/1500 Mitsubishi EVO 1-3 Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Mitsubishi EVO 1-3 Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmissions only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Nissan Silvia S13 (CA18DET) Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Nissan Silvia S13 (CA18DET) Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Nissan Silvia S13 and 180SX (SR20DET) Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000/1500 Nissan Silvia S14 S1 “ZENKI” Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Nissan Silvia S14 S1 “ZENKI” Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Nissan Silvia S14 S1 “ZENKI” Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
Elite 1000/1500 Honda Integra DC5 Plug ‘n’ Play Adaptor Harness
$460.00-
Add to cartElite 1000/1500 Honda Integra DC5 Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06 Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information)
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
Notes: Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the quick start guide for further information. Elite 1000 ECU does NOT support the factory intake runner control & check engine light. Please use the Elite 1500 if these functions are required.
$460.00