Haltech rate
-
Elite 1000-2500 Mazda RX7 FD3S-S6 Plug ‘n’ Play Adaptor Harness
$460.004 interest-free payments or as low as $42/mo with Affirm. Check your purchasing power
Add to cartElite 1000-2500 Mazda RX7 FD3S-S6 Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Mazda RX7 FD3S-S6 (92-95) 2 row ECU plug. Manual transmission only.
Includes: Injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
$460.00 -
HPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Kit Length: 2.0m (78″)
$470.00-
Add to cartHPI6 – High Power Igniter – 15 Amp Six Channel Flying Lead Kit Length: 2.0m (78″)
Includes: Flying Lead harness.
$470.00 -
HPI8 – High Power Igniter – 15 Amp Eight Channel with Plug & Pins
$472.00-
Add to cartHPI8 – High Power Igniter – 15 Amp Eight Channel with Plug & Pins
Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins.
$472.00 -
iC-7 Sensor Pack For Stand-Alone Installations
$478.00-
Add to cartiC-7 Sensor Pack For Stand-Alone Installations
Suits: iC-7 Semi Terminated Harness – HT-060300
Includes: 1 x HT-010304 Coolant Temp Sensor – 1/8 NPT Thread 1 x HT-120000 Adaptor – Brass 1/8″NPTF to 3/8″NPT 2 x HT-010904 150 PSI “TI” Fuel/Oil/Wastegate Pressure Sensors
$478.00 -
Elite 2500 & 2500 T Premium Universal Wire-in Harness – 3M Length: 3M (9.8′)
$519.00-
Add to cartElite 2500 & 2500 T Premium Universal Wire-in Harness – 3M Length: 3M (9.8′)
Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits.
$519.00 -
TCA-8 Eight Channel Thermocouple Amplifier
$549.00-
Add to cartTCA-8 Eight Channel Thermocouple Amplifier
Suits: Elite and NEXUS Series ECUs only
Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4ft, Quick Start Guide
Notes: Thermocouple Probes Sold Separately
$549.00 -
TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B
$549.00-
Add to cartTCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B
Suits: Elite Series or Platinum Series ECU’s
Includes: Eight Channel Thermocouple Amplifier Elite CAN cable DTM-4 to Circular Connector Cable 1200mm / 4ft Quick Start Guide
Notes: Thermocouple Probes Sold Separately
$549.00 -
WB2 Bosch – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$550.004 interest-free payments or as low as $35/mo with Affirm. Check your purchasing power
Add to cartWB2 Bosch – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: Bosch LSU 4.9 Sensor
Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4’/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide.
Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
$550.00 -
WB1 NTK – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$550.00-
Add to cartWB1 NTK – Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: NTK Sensor
Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4’/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide.
Notes: Best product for methanol powered vehicles
$550.00 -
HPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Kit Length: 2.0m (78″)
$555.00-
Add to cartHPI8 – High Power Igniter – 15 Amp Eight Channel Flying Lead Kit Length: 2.0m (78″)
Includes: Flying Lead harness.
$555.00 -
NEXUS R5 Basic Universal Wire-In harness Length: 2.5M
$575.00-
Add to cartNEXUS R5 Basic Universal Wire-In harness Length: 2.5M
Suits: NEXUS R5
Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
Notes: The following cables within this harness are 5M in length * High Current Outputs 2 to 12 * Extra High Current Outputs 1 to 4
$575.00 -
Elite 2000/2500 GM GEN III LS1 & LS6 non DBW Terminated Harness
$670.00-
Add to cartElite 2000/2500 GM GEN III LS1 & LS6 non DBW Terminated Harness
Suits: Factory EV1 injector connectors and common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included)
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040090) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
$670.00 -
Elite 2500 GM GEN III LS1 & LS6 (DBW Retrofit Ready) Terminated Harness Injector Connector: Bosch EV1 (as per factory)
$670.00-
Add to cartElite 2500 GM GEN III LS1 & LS6 (DBW Retrofit Ready) Terminated Harness Injector Connector: Bosch EV1 (as per factory)
Suits: Retrofit of a GEN IV LS2/3 DBW throttlebody. Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Manual transmission only.
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
$670.00 -
Elite 2000/2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Injector Connector: Bosch EV1
$670.00-
Add to cartElite 2000/2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Injector Connector: Bosch EV1
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
$670.00 -
Elite 2000/2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Injector Connector: Bosch EV6 (as per factory)
$670.00-
Add to cartElite 2000/2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Injector Connector: Bosch EV6 (as per factory)
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
$670.00 -
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Injector Connector: Bosch EV1
$670.00-
Add to cartElite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Injector Connector: Bosch EV1
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
$670.00 -
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Injector Connector: Bosch EV6 (as per factory)
$670.00-
Add to cartElite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Injector Connector: Bosch EV6 (as per factory)
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Engine harness with fuse block and firewall grommet.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
$670.00 -
NEXUS R5 Basic Universal Wire-In Harness 5 Metre Length: 5M
$700.00-
Add to cartNEXUS R5 Basic Universal Wire-In Harness 5 Metre Length: 5M
Suits: NEXUS R5
Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire
Notes: Extended Length Harness – 5metre (16′)
$700.00 -
Elite 1500 Polaris Slingshot (2015-2016) Plug’n’Play Adaptor Harness
$729.00-
Read moreElite 1500 Polaris Slingshot (2015-2016) Plug’n’Play Adaptor Harness
Suits: Plug’n’Play replacement of the factory ECU for Polaris Slingshot (2015-2016). Connects directly with a Haltech Elite 1500 ECU.
Includes: Plug’n’Play adaptor harness and M14 x 1.5 air temp sensor.
$729.00 -
Pro Tuner “Knock Ears” Kit Dual Channel 2014 Spec
$745.00-
Add to cart -
WB2 NTK – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
$750.00-
Add to cartWB2 NTK – Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
Suits: NTK Sensor
Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4’/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick Start Guide.
Notes: Best product for methanol powered vehicles
$750.00 -
Elite 1500 Polaris RZR XP 1000 (2015-2016) Plug ‘n’ Play Adaptor Harness
$809.00-
Read moreElite 1500 Polaris RZR XP 1000 (2015-2016) Plug ‘n’ Play Adaptor Harness
Suits: Plug ‘n’ Play replacement of the factory ECU for Polaris RZR XP 1000 (2015-2016)
Includes: Molded polyurethane plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins and pre-wired dual channel ignition module.
$809.00