Medium Flat rate
Showing 409–432 of 833 results
-
Linear Position Sensor – 1/2″ – 100mm Travel Length: Between Mounting Holes (Closed) 217mm
$110.00-
Add to cartLinear Position Sensor – 1/2″ – 100mm Travel Length: Between Mounting Holes (Closed) 217mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$110.00 -
STM Evo 6/7/8/9 Water Neck for Radiator Cap Relocation
$110.00 – $140.00-
Select optionsSTM Evo 6/7/8/9 Water Neck for Radiator Cap Relocation
Available for these Applications:
1996-2005 Mitsubishi Lancer Evolution VI VII VIII
2006 Mitsubishi Lancer Evolution IX
(* Radiator cap is not included *)$110.00 – $140.00 -
STM ARP Stainless Exhaust Manifold Stud Set for 7-Bolt DSM & Evo 1-9
$115.00-
Add to cartSTM ARP Stainless Exhaust Manifold Stud Set for 7-Bolt DSM & Evo 1-9
Vehicle Fitment:
CD9A Evolution I
CE9A Evolution II III
CN9A Evolution IV
CP9A Evolution V VI
CT9A Evolution VII VIII IX
1995-1999 Eclipse GST/GSX
1995-1998 Talon TSi$115.00 -
STM Stainless Steel Brake Lines for 2G DSM
$115.00-
Add to cartSTM Stainless Steel Brake Lines for 2G DSM
Vehicle Fitment:
2G DSM AWD/FWD with Rear Disc Brakes
1995-1999 Eclipse GST/GSX
1995-1998 Talon TSi$115.00 -
STM Stainless Steel Brake Lines for Evo 7/8/9
$115.00-
Add to cartSTM Stainless Steel Brake Lines for Evo 7/8/9
Vehicle Fitment:
2001-2006 Evolution VII VIII IX$115.00 -
STM Stainless Steel Brake Lines for Evo X
$115.00-
Add to cart -
STM ARP Stainless Exhaust Manifold Stud Set for 4G63 6-Bolt DSM
$119.00-
Add to cartSTM ARP Stainless Exhaust Manifold Stud Set for 4G63 6-Bolt DSM
Vehicle Fitment:
6-Bolt 4G63 1G DSM
1990-1992.5 Eclipse GST/GSX
1990-1992.5 Talon TSi
1990-1992.5 Laser RS
1991-1992 Galant VR4$119.00 -
Elite CAN HUB 4 Port DTM-4
$120.00-
Add to cartElite CAN HUB 4 Port DTM-4
SUITS: For use with up to three CAN devices.INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 – 300mm (12″)NOTES: Direct Plug ‘n’ Play compatible with an Elite ECU CAN port or Elite ECU Harness CAN connector. Combine two or more Elite CAN Hubs as required to connect mutiple CAN devices to your ECU.$120.00 -
Wideband Sensor – Bosch LSU 4.9
$125.00-
Add to cartWideband Sensor – Bosch LSU 4.9
Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2
Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
$125.00 -
Boost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
$125.00-
Add to cartBoost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)$125.00 -
iC-7 Moulded Panel Mount Size: 250mm x 500mm (10″ x 20″)
$125.00-
Add to cartiC-7 Moulded Panel Mount Size: 250mm x 500mm (10″ x 20″)
Suits: Haltech iC-7 Display Dash
Includes: 1 x iC-7 Moulded Panel Mount- Black
Notes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic
$125.00 -
Haltech HC5 – Hydraulic Crimper
$125.00-
Add to cartHaltech HC5 – Hydraulic Crimper
Suits: 00 AWG to 12AWG cable.
Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets – (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide
$125.00 -
3 Bar GM MAP Sensor
$125.00-
Add to cart -
GPS Speed Input Module Length: 300mm
$125.00-
Add to cartGPS Speed Input Module Length: 300mm
Outputs: 0V to 12V Pulsed Output
Suits: Apllications that require a digital speed signal
Includes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins
Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accuracy 0.3% Deviation, Pulse Compensation in tunnel, Anti GPS Drift technology.
$125.00 -
Linear Position Sensor – 1/2″ – 150mm Travel Length: Between Mounting Holes (Closed) 267mm
$125.00-
Add to cartLinear Position Sensor – 1/2″ – 150mm Travel Length: Between Mounting Holes (Closed) 267mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$125.00 -
Nexus R3 Tube Mount Kit – 1.25″ Diameter: 1.25″ / 31.75mm
$125.00-
Add to cartNexus R3 Tube Mount Kit – 1.25″ Diameter: 1.25″ / 31.75mm
Suits: Nexus R3 VCU
Includes: 1 x Mounting Plate, 2 x 1.25″ Tube Clamps
Notes: Brackets are made from CNC machined 6061 Aluminium and then annodized for a durable black finish.
$125.00 -
STM Evo 7/8/9 Seat Bracket Lowering Kit
$129.00-
Add to cartSTM Evo 7/8/9 Seat Bracket Lowering Kit
Vehicle Fitment:
2001-2006 Evolution VII VIII IX
• Fits factory seats only$129.00 -
STM Stainless Valve Cover Bolt Kit – Evo X
$129.00-
Add to cartSTM Stainless Valve Cover Bolt Kit – Evo X
Vehicle Fitment:
2008-2015 Mitsubishi Lancer Evolution X$129.00 -
STM Stainless Exhaust Manifold Cover for Evo 8/9
$129.00-
Add to cartSTM Stainless Exhaust Manifold Cover for Evo 8/9
Vehicle Fitment:
2003-2006 Evolution VIII IX
• Fits Stock Evo 8/9 Manifold
• Fits FP Cast Evo 8/9 Manifold
• Also available in Titanium$129.00 -
EVO 4-9 OHM Racing IGN-1A Coil Plate
$129.00 – $612.95-
Select options -
STM – 10AN Turbo Oil Return Line Braided Nylon for Evo 7/8/9 Factory Style Turbo (TORLB-STK)
$129.09-
Add to cartSTM – 10AN Turbo Oil Return Line Braided Nylon for Evo 7/8/9 Factory Style Turbo (TORLB-STK)
Vehicle Fitment:
2001-2006 Evolution VII VIII IX$129.09 -
Linear Position Sensor – 1/2″ – 200mm Travel Length: Between Mounting Holes (Closed) 317mm
$130.00-
Add to cartLinear Position Sensor – 1/2″ – 200mm Travel Length: Between Mounting Holes (Closed) 317mm
Suits: All ECU’s with spare AVI
Includes: 1 x Sensor , 1 x Opposing Connector Set
Notes: Use of nylon mounting bolts recommended for sensor protection
$130.00 -
DSM/EVO 1-3/GVR4 OHM Racing IGN-1A Coil Plate
$134.99 – $574.94-
Select optionsDSM/EVO 1-3/GVR4 OHM Racing IGN-1A Coil Plate
If you are looking for making your own kit, this nice plate is a must have, run all the wiring through the bottom to keep things clean!
$134.99 – $574.94 -
Plug and Pin Set – Suits Nexus R3
$135.00-
Add to cartPlug and Pin Set – Suits Nexus R3
Includes: Includes 1 x AMP 34 Position Connector Key1 + pins 1 x AMP 34 Position Connector Key2 + Pins 1 x DTP 4 Position Deutsch Connector Wedge and Pins
Notes: Used to construct harness for Nexus R3 VCU’s
$135.00