Engine Management
-
Elite 750 + Toyota LandCruiser 80 Series Plug’n’Play Adaptor Harness Kit
$1,655.00Starting at $81/mo with Affirm. Check your purchasing power
Add to cart
Elite 750 + Toyota LandCruiser 80 Series Plug’n’Play Adaptor Harness Kit
Suits: MY95-97 Toyota LandCruiser 80 Series with 1FZ-FE and manual transmission only. Supports sub tank transfer system. (European delivered models please confirm your ECU pin out with Haltech before ordering)
Includes: Elite 750 ECU, Pug’n’Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins. waterproof USB cap, USB programming cable and USB software key.
Notes: Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system (6 individual coils). E750 ECU does NOT support the factory idle speed stepper motor control. Please use an E2000/2500 ECU if this function is required.
$1,655.00 -
ECUMASTER PMU16-DL POWER MANAGEMENT UNIT
$1,656.00Starting at $81/mo with Affirm. Check your purchasing power
Read more
ECUMASTER PMU16-DL POWER MANAGEMENT UNIT
PMU16-DL Power Management Unit with Datalogging
ECUMASTER PMU is an inteligent power management unit designed to replace the old, traditional
and often unreliable fuses and relays. PMU is not only an electronic switch, but a device that can
perform all kinds of advanced operations, validate logical conditions, manage abnormal situations,
as well as log its parameters for you to have an oversight.$1,656.00 -
Elite 1500 ECU + Plug and Pin Set
$1,684.00Starting at $82/mo with Affirm. Check your purchasing power
Add to cart
-
Elite 750 + Premium Universal Wire-in Harness Kit Length: 5.0m (16′)
$1,688.00Starting at $82/mo with Affirm. Check your purchasing power
Read more
Elite 750 + Premium Universal Wire-in Harness Kit Length: 5.0m (16′)
Outputs: Up to 6 injector and 6 ignition.
Suits: Universal 1-12 cylinder or 2-3 rotor applications.
Includes: Elite 750 ECU, Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 2 relays, 6 fuses and pins for the 6 spare power circuits. Waterproof USB cap, USB programming cable.
Notes: Single connector ECU kit ideal for basic 6 cylinder or 2 rotor engines, basic EFI conversions, single VVTi engines.
$1,688.00 -
Nexus S2 ECU Only
$1,695.00Starting at $83/mo with Affirm. Check your purchasing power
Add to cart
Nexus S2 ECU Only
Suits: Engines with up to 4 cylinders or up to 2 rotors. Racing applications where advanced race features and data logging is required.
Includes: Nexus S2 ECU, 4 x mounting bolts, USB-C Cable, USB-C dust cap, Quick Start Guide, Wiring Diagram.
$1,695.00 -
EMU BLACK FOR LOTUS 2ZZ DBW
$1,699.00Starting at $83/mo with Affirm. Check your purchasing power
Read more
EMU BLACK FOR LOTUS 2ZZ DBW
The ECU comes unlocked with all functions enabled including traction control , pit limiters , launch controls and much more.
A great feature included in the EMU Black is the wide band lambda controller which is built in, along side knock control, full VVT access and lift is also supported.$1,699.00 -
ECUMASTER ADU7 ADVANCED DISPLAY UNIT REV.2, IP65
$1,699.00Starting at $83/mo with Affirm. Check your purchasing power
Read more
-
Nexus S2 ECU + Plug and Pin Set
$1,815.00Starting at $88/mo with Affirm. Check your purchasing power
Add to cart
-
Haltech iC-7 Stand-Alone “Classic” Kit Size: 7in
$1,875.00Starting at $91/mo with Affirm. Check your purchasing power
Add to cart
Haltech iC-7 Stand-Alone “Classic” Kit Size: 7in
Suits: Perfect for old-school hot rods, mechanically injected muscle, carbureted classics and everything in between, the Haltech stand-alone IC-7 Classic kit is ideal for anyone looking to simplify and modernise their analogue gauge setup. Suits carbureted or mechanically injected vehicles and/or vehicles without an ECU.
Includes: 1 x Haltech iC-7 Dash. 1 x iC-7 Semi Terminated Harness. 1 x 1/8 NPT Coolant Temperature Sensor. 2 x 0-150 Psi Fuel/Oil Pressure Sensors. 1 x 3/8NPTF to 1/8NPTF Adaptor.
Notes: Order now for early September delivery.
$1,875.00 -
Elite 2500 ECU
$1,959.00Starting at $95/mo with Affirm. Check your purchasing power
Add to cart
Elite 2500 ECU
OUTPUTS: Up to 8 injector and 8 ignition.
SUITS: Universal 1-12 cylinder or 2-4 rotor applications.INCLUDES: Elite 2500 ECU with DBW and Race Functions, USB programming cable and USB Software Key.NOTES: Ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts.$1,959.00 -
Elite 1500 + Basic Universal Wire-in Harness Kit LENGTH: 2.5m (8′)
$1,959.00Starting at $95/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Basic Universal Wire-in Harness Kit LENGTH: 2.5m (8′)
LENGTH: 2.5m (8′)OUTPUTS: Up to 4 injector and 4 ignition.SUITS: Universal 1-12 cylinder or 2 rotor applications.INCLUDES: Elite 1500 ECU with DBW and Race Functions. Basic Universal Wire-In Harness. Waterproof USB cap, USB programming cable and USB Software Key.NOTES: Does not include fuse and relay box.$1,959.00 -
Elite 2500 & REM 16 Inj V8 Small/Big Block GM, Ford & Chrysler Terminated Harness Injector Connector: Bosch EV1
$1,979.00Starting at $96/mo with Affirm. Check your purchasing power
Read more
Elite 2500 & REM 16 Inj V8 Small/Big Block GM, Ford & Chrysler Terminated Harness Injector Connector: Bosch EV1
Outputs: Up to 16 injectors, 8 ignition and auxillary I/O.
Suits: V8 GM Small/Big Block V8 Ford Small/Big Block Chrysler HEMI
Includes: Elite 2500 & Race Expansion Module (REM) integrated 16 sequential injector terminated engine harness with with 160A SSR, fuse block, firewall grommet and distributor/MSD ready ignition harness, USB programming cable and USB Software Key.
Notes: Used for a new fully integrated installation. DBW function not available when used in combination with a REM. 8 individual ignition coil ready when used with optional HT-130306, HT-130311, HT-130312 or HT-130313.
$1,979.00 -
Haltech uC-10 Digital Dash – Size: 10in
$1,995.00Starting at $97/mo with Affirm. Check your purchasing power
Add to cart
Haltech uC-10 Digital Dash – Size: 10in
PRE-ORDER NOWOBDII functionality requires adapter
cable HT-135003 (sold separately).
Click here: https://www.ohm-racing.com/product/haltech-ic-7-obdii-to-can-cable-length-1400mm-55inSuits: All current Haltech ECUs via CAN. Also Plug’n’Play compatible with the following aftermarket ECU brands: Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs.
Includes: 1 x Haltech uC-10 Digital Dash, 1 x 34P connector – same as HT-131001, 1 x Haltech DTM4 to DTM4 CAN cable 3.0m (118in), 1 x USB-C cable, 3 x M5 x 8mm mounting screws, 2 x Momentary switches, pre-terminated 800mm 22AWG Cable, 1 x Glass Mount Wi-Fi antenna (Wi-Fi functionality will be made available with future firmware update), 1 x Haltech fabric keytag, Quick Start Guide, Haltech stickers.
$1,995.00 -
ECUMASTER ADU7 AUTOSPORT ADVANCED DISPLAY UNIT
$1,999.00Starting at $97/mo with Affirm. Check your purchasing power
Read more
ECUMASTER ADU7 AUTOSPORT ADVANCED DISPLAY UNIT
ADU7 AutoSport Advanced Display Unit with Logging
$1,999.00 -
Elite 1500 + VW/Audi 1.8T AWP ONLY (2001-2006) Plug ‘n’ Play Adaptor Harness Kit
$2,039.00Starting at $99/mo with Affirm. Check your purchasing power
Read more
Elite 1500 + VW/Audi 1.8T AWP ONLY (2001-2006) Plug ‘n’ Play Adaptor Harness Kit
Suits: Plug ‘n’ Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006) Volkswagen Golf Mk4 GTI, Bora/Jetta, Beetle, Polo GTI, Audi A3, A4 Quattro Sport, TT Mk1 (8N), Skoda Octavia vRS & SEAT Leon, Toledo. Manual transmission only.
Includes: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
Notes: The CAN dash support was developed on a 2003 VW Beetle – other models may not be supported or have reduced dash functionality.
$2,039.00 -
Elite 2500 ECU + Plug and Pin Set
$2,044.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
-
Elite 1500 + Premium Universal Wire-in Harness Kit LENGTH: 2.5m (8′)
$2,049.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Premium Universal Wire-in Harness Kit LENGTH: 2.5m (8′)
LENGTH: 2.5m (8′)OUTPUTS: Up to 4 injector and 4 ignition.SUITS: Universal 1-12 cylinder or 2 rotor applications.INCLUDES: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB Software Key.$2,049.00 -
Elite 1500 + Mitsubishi EVO 4-8 (5 Speed) Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Mitsubishi EVO 4-8 (5 Speed) Plug ‘n’ Play Adaptor Harness Kit
SUITS: Plug ‘n’ Play replacement of the factory ECU for Mitsubishi EVO 4-8 (5 Speed)(All Regions) EVO 8 MR (USDM Only) Eclipse 2G Turbo (USDM) Manual transmissions only.INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.NOTES: E1000 ECU does NOT support the Intercooler Water Spray function on the EVO 7 & 8$2,059.00 -
Elite 1500 + Mitsubishi Galant VR4 and Eclipse 1G Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Mitsubishi Galant VR4 and Eclipse 1G Plug ‘n’ Play Adaptor Harness Kit
SUITS: Plug ‘n’ Play replacement of the factory ECU for Mitsubishi Galant VR4 (Australian Delivered and JDM) Eclipse 1G Turbo (JDM and USDM) Manual transmission only.INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.$2,059.00 -
Elite 1500 + Nissan Silvia S13 and 180SX (SR20DET) Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Nissan Silvia S13 and 180SX (SR20DET) Plug ‘n’ Play Adaptor Harness Kit
SUITS: Plug ‘n’ Play replacement of the factory ECU for Nissan Silvia S13 and 180SX (SR20DET) Manual transmission only.INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.$2,059.00 -
Elite 1500 + Mazda RX7 FD3S-S6 Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Mazda RX7 FD3S-S6 Plug ‘n’ Play Adaptor Harness Kit
SUITS: Plug ‘n’ Play replacement of the factory ECU for Mazda RX7 FD3S-S6 (92-95) 2 row ECU plug. Manual transmission only.INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.$2,059.00 -
Elite 1500 + Mitsubishi EVO 1-3 Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Mitsubishi EVO 1-3 Plug ‘n’ Play Adaptor Harness Kit
SUITS: Plug ‘n’ Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmissions only.INCLUDES: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.$2,059.00 -
Elite 1500 + Honda Civic EP3 Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Honda Civic EP3 Plug ‘n’ Play Adaptor Harness Kit
Suits: Plug ‘n’ Play replacement of the factory ECU for Honda Civic EP3 02–05 and Integra DC5 / Acura RSX 02–04. Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information)
Includes: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
$2,059.00 -
Elite 1500 + Honda Integra DC5 Plug ‘n’ Play Adaptor Harness Kit
$2,059.00Starting at $100/mo with Affirm. Check your purchasing power
Add to cart
Elite 1500 + Honda Integra DC5 Plug ‘n’ Play Adaptor Harness Kit
Suits: Plug ‘n’ Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06 Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request – Please see the product quick start guide for further information)
Includes: Elite 1500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
$2,059.00
