haltech
Showing 97–120 of 128 results
-
Flex Fuel Composition Sensor
$199.00-
Add to cartFlex Fuel Composition Sensor
Suits: 3/8 “GM Spring Lock” fittings.Includes: Matching plug and 3 pins.
$199.00 -
500 PSI “TI” Pressure Sensor Thread: 1/8 NPT
$199.00-
Add to cart500 PSI “TI” Pressure Sensor Thread: 1/8 NPT
Includes: Matching plug and pins, -4 AN adaptor.
Notes: “TI” Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$199.00 -
TMS-4 Tyre Monitoring System External Sensors
$199.00-
Add to cartTMS-4 Tyre Monitoring System External Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x External Sensors 4 x anti-theft lock nuts Lock Nut spanner Mounting Hardware Quick Start Guide
Notes: Batteries for external sensors are included and are replaceable (Use- CR1632) Typical lifespan of battery is 1 to 2 years
$199.00 -
TMS-4 Tyre Monitoring System Internal Sensors
$199.00-
Add to cartTMS-4 Tyre Monitoring System Internal Sensors
Suits: Haltech Nexus and Elite ECU’s using NSP and ESP Software
Includes: 1 x Haltech TMS-4 Reciever 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Sensors Warning Sticker Set Mounting Hardware Quick Start Guide
Notes: Batteries for internal sensors are included and are NOT replaceable Typical lifespan of battery is 3years
$199.00 -
Semi Terminated Stand-Alone Harness For iC-7 Display Dash
$209.00-
Add to cartSemi Terminated Stand-Alone Harness For iC-7 Display Dash
Suits: Haltech iC-7 Display Dash HT-010001 – iC-7Sensor Pack
Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable Ties
Notes: Use with HT-010001 – iC-7 Sensor Pack
$209.00 -
5 Bar “TI” MAP Sensor Thread: 1/8 NPT
$239.00-
Add to cart5 Bar “TI” MAP Sensor Thread: 1/8 NPT
Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors.
Notes: “TI” MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$239.00 -
7 Bar “TI” MAP Sensor Thread: 1/8 NPT
$239.00-
Add to cart7 Bar “TI” MAP Sensor Thread: 1/8 NPT
Includes: Matching plug and pins, -4 AN & 5mm hosetail adaptors.
Notes: “TI” MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose – If required use Pressure Sensor Extension Hose HT-039103
$239.00 -
PD16 Flying Lead Harness – 5M Length: 5M / 16FT
$279.00-
Add to cartPD16 Flying Lead Harness – 5M Length: 5M / 16FT
Suits: Nexus PD16
Includes: Wire in Harness, 5 meters (16ft) in Length – Suits Nexus PD16
$279.00 -
iC-7 Sensor Pack For Stand-Alone Installations
$463.00-
Add to cartiC-7 Sensor Pack For Stand-Alone Installations
Suits: iC-7 Semi Terminated Harness – HT-060300
Includes: 1 x HT-010304 Coolant Temp Sensor – 1/8 NPT Thread 1 x HT-120000 Adaptor – Brass 1/8″NPTF to 3/8″NPT 2 x HT-010904 150 PSI “TI” Fuel/Oil/Wastegate Pressure Sensors
$463.00 -
Turbosmart GenV eWG40 Comp Gate 40 Diameter: 40mm
$849.95-
Add to cartTurbosmart GenV eWG40 Comp Gate 40 Diameter: 40mm
Notes: Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold & outlet hardware. The GenV CompGate40 already had class leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control aswell.
$849.95 -
Laser Ride Height Sensor Length: 25mm (1″) to 500mm (19.5″) Range
$879.00-
Add to cartLaser Ride Height Sensor Length: 25mm (1″) to 500mm (19.5″) Range
Outputs: 0-5v Analogue Output.
Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective glass lens and setup guide.
$879.00 -
Turbosmart GenV eWG45 Hypergate 45 Diameter: 45mm
$929.95-
Add to cartTurbosmart GenV eWG45 Hypergate 45 Diameter: 45mm
Notes: Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold & outlet hardware. The GenV Hypergate45 already had class leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control aswell.
$929.95 -
Turbosmart GenV eWG50 Progate 50 Diameter: 50mm
$1,039.95-
Add to cartTurbosmart GenV eWG50 Progate 50 Diameter: 50mm
Notes: Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold & outlet hardware. The GenV ProGate40 already had class leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control aswell.
$1,039.95 -
Haltech IC-7 Display Dash
$1,099.00-
Select optionsHaltech IC-7 Display Dash
With a crisp, clear and full colour display, the all new Haltech IC-7 Display Dash lets you see things in a brand new way.
$1,099.00 -
Turbosmart GenV eWG60 Powergate 60 Diameter: 60mm
$1,149.95-
Add to cartTurbosmart GenV eWG60 Powergate 60 Diameter: 60mm
Notes: Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold & outlet hardware. The GenV PowerGate60 already had class leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control aswell.
$1,149.95 -
PD16 PDM + Plug and pin Set
$1,174.00-
Add to cartPD16 PDM + Plug and pin Set
Suits: Nexus or Elite Series ECU’s
Includes: Haltech PD16 and Plug and Pin Set to suit
Notes: The NEXUS PD16 is Haltech’s new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. Designed to integrate seemlessly into your existing Haltech Elite or Nexus engine management system, the PD16 delivers safe, dependable power delivery to your vehicle.
$1,174.00 -
Elite 750 ECU
$1,199.00-
Add to cartElite 750 ECU
Outputs: Up to 6 injector and 6 ignition.
Suits: Universal 1-12 cylinder or 2-3 rotor applications.
Includes: Elite 750 ECU, Waterproof USB cap, USB programming cable and software USB Key.
Notes: Single connector ECU ideal for basic 6 cylinder or 2 rotor engine, basic EFI conversions, single VVTi engines.
$1,199.00 -
Elite 750 ECU + Plug and Pin Set
$1,259.00-
Add to cart